Durr EcoGun 615 Руководство по эксплуатации и техническому обслуживанию - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Краскопульт Durr EcoGun 615. Durr EcoGun 615 20 страниц. Automatic air spraying gun

Печатать страницу

Work Area

Relevant standards apply to spraying and handling with the

combustible liquids. Areas and rooms, where the coating materials

are handled, must be identified and modified in relation to the

coating material combustibility class acc. to applicable standards

and regulations.

If the automatic gun is used and operated in other countries,

then local relevant standards and regulations apply to it.

CAUTION

All workers assigned with operation and maintenance of the equipment must

be provably acquainted wit the safety instruction and with this operation and

maintenance manual!

EQUIPMENT DESCRIPTION

The EcoGun 615 automatic spraying gun is designed to applications

of liquids by pressure supply of the coating material (hereinafter

referred to as NH), glue etc. The gun consists of two functional parts:

» The nozzle system consisting from the jet, stainless insert and

closing pin. The nozzle system creates the spraying pattern.

The pin with the nozzle are manually lapped together to achieve

perfect seal, when the applied material outlet is closed. The nozzle

features special insert enabling perfect seal of the nozzle with

lower tightening force.

» Gun body: Front part of the gun mechanical section is fitted with

the stainless insert for applied material with the pin seal preventing

leak of the material supplied under pressure. In relation to type of

the NH, it is possible for fit the pin seal from PTFE or from graphite

for particularly abrasive materials. Fittings for connection of the

NH hose is fitted with the cap clamping nut for safe and perfect

connection of the PA hose of diameter 8.0x6.0mm. The material

outlet is fitted with the M12x1 plug. The outlet serves to easy

cleaning of the connecting channel, resp. for circulation of the

material, resp. it enables connection of two applied materials. The

connecting fitting is not part of the supply.

» From the source (transfer pump, pressure tank, resp. central

distribution system) the applied material is supplied to the

gun under pressure. Back part of the gun mechanical section

is fitted with a pneumatic cylinder for opening/closing of the

nozzle system with the limit stop screw, resp. pin stroke micro-

control to adjust the stroke, with the wind-vane air „K" control to

adjust the beam shape (round, oval), atomizing air „A" control

for spraying of the pressure supplied NH, variable holder with

EcoGun 615