4IPNET EAP717 Руководство по быстрой установке - Страница 8
Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Беспроводная точка доступа 4IPNET EAP717. 4IPNET EAP717 16 страниц. Enterprise access point
Печатать страницу
Hardware Installation
Please follow the steps mentioned below to install the hardware of EAP717:
Step 1. Place the EAP717 at the best location. The best location is usually at the center of your intended
wireless network. If admin would like to mount the AP on the wall (on a socket), please refer to the
included EAP717/EAP747/EAP757 Connection Guide. Screw the metal panel to the wall, and then
turn the EAP717 clockwise to fasten to the panel. For installation instructions on the Ceiling Mount
Kit, please refer to the included Connection Guide.
Step 2. Connect one end of the Ethernet cable to the Uplink port and the other end of the cable to a switch,
a router, or a hub. The EAP717 is now connected to your existing wired LAN network.
Step 3. There are two ways to supply power to EAP717
a) Connect the DC power adaptor to the power jack socket.
b) The Uplink port is capable of receiving PoE. Connect an IEEE 802.3af/at-compliant PSE device
(e.g. a PoE-switch) to the Uplink port of EAP717 with the Ethernet cable.
Now, the Hardware Installation is complete.
Please use only the power adapter supplied with the package. Using a different power adapter
may damage this system.
To verify the wired connection between the AP and your switch / router / hub, please also check
the LED status indicator of the respective network devices.
Copyright © 4IPNET, INC. All rights reserved.
EAP717 Enterprise Access Point
4
Quick Installation Guide
ENGLISH