2easy CDV17D Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Система внутренней связи 2easy CDV17D. 2easy CDV17D 12 страниц. 2-wire intercom system

Печатать страницу
DIP Switch Setting
The DIP switch is designed to set the code the for door station and the monitor, there
are two states for each DIP switch, please refer to the following:
ON(1)
O N
=
Door station DIP setting
Total 3 bits can be configured, bit-1 and bit-2 are used to assign ID code for door
station, bit-3 is used to match the video impedance.The switches can be modified either
before or after installation.
Bit state
ON
1 2
3
ON
1 2
3
ON
1 2
3
ON
1 2
3
Note: for video impedance EOL: set the bit-3 on.
Indoor monitor DIP setting
There are 6 bits in total. The DIP switches are used to configure the user address for Monitors.
Bit-6 is an video impedance EOL switch, set to ON to match the impedance.
Bit-1~Bit-5 are used to set user address, the user code should set be set to
0~15. Please refer to the following settings:
OFF(0)
O N
=
ID = 0(00), set to the first door station
ID = 1(10), set to the second door station
ID = 2(01), set to the third door station
ID = 3(11), set to the fourth door station
Description
-7-