Elsner 10150 Операция - Страница 11

Просмотреть онлайн или скачать pdf Операция для Контроллер Elsner 10150. Elsner 10150 13 страниц. Radio control system
Также для Elsner 10150: Техническое описание, инструкции по установке (20 страниц)

Outdoor temperature in the set range. Heating is turned on.

1.4. Beeps

If a button or a touch sensitive area is actuated, a beep sounds. If a button has been

held down, then a higher beep sounds as confirmation that the button has been recog-

nised as held down. This is, for example, valid for the settings button in order to access

the default settings or the SET button to save.

Shortly before the display battery is flat, a warning signal sounds every 15 minutes

(combination of high and low beeps).

If, instead of a sensor value, ER error is displayed then the wireless connection

to the weather station is disrupted or the sensor is defective.

Check whether the weather station is powered (fuse). Have the device checked by an

electrician if the problem continues.

Installation, testing, operational start-up and troubleshooting of the unit

should only be performed by an electrician (accredited according to

VDE 0100).

1.6. Table: Memory locations for the outputs and

inputs

In the table you can enter the devices that have been taught and the functions for the

individual memory location and note keywords for automatic mode set.

Memory

Type

location

Display

position

Solexa II Control • above Software-Version 1.5 • Version: 07.06.2016

Technical changes and errors excepted.

Room

Operating the display

Keyword