Datalogic GRYPHON ESD D200 Краткая справка - Страница 6

Просмотреть онлайн или скачать pdf Краткая справка для Считыватель штрих-кодов Datalogic GRYPHON ESD D200. Datalogic GRYPHON ESD D200 19 страниц.

1 DEFAULT

Read the RESTORE DEFAULT.

Leggere il codice che ripristina i default.

Lecture du code de configuration par défaut.

Lesen Sie den Restore Default Code, um die

Werkseinstellung wieder herzustellen.

RS232 Standard DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking,

delay disabled, rx timeout 5 sec., ack/nack disabled, FIFO

enabled, serial trigger lock disabled;

DATA FORMAT

code length not transmitted, no header, terminator = CR-LF,

character replacement disabled

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, num lock unchanged, inter-

character and inter-code delays disabled, control character

emulation = ctrl+shift+key;

DATA FORMAT

code length not transmitted, no header, terminator =

ENTER, character replacement disabled

POWER SAVE

scan rate 270 scans/s, standby disabled, sleep state

disabled, enter sleep timeout 0.6 sec

READING PARAMETERS

operating mode hand-held, trigger type = hardware, trigger

signal = level, no trigger timeout, Flash On = 1 sec, Flash

Off = .6 sec, one read per cycle, safety time .5 sec, beeper

intensity high, tone 2, beeper type monotone, beeper length

short, good read spot duration medium

DECODING PARAMETERS

ink spread enabled, overflow control enabled, interdigit

control enabled, Puzzle Solver™ disabled, decoding

safety = one read

RESTORE DEFAULT

: code identifier disabled, no field adjustment,