Austa Austa-1P6002G Руководство по сборке, установке и эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по сборке, установке и эксплуатации для Инвертор Austa Austa-1P6002G. Austa Austa-1P6002G 13 страниц.

Step 4 – Ground the system

Each AU-1P600/8002G has an integrated ground protection circuit.The

grounding wire is through the trunk cable, and should be securely connected to

the groundconnector in the junction box.

Step 5 – Ground the system through racking (option)

AU-1P600/8002G may also be grounded through the racking as shown below.

Step 6 – Complete the connection map and connect the PV Modules

AU-1P600/8002G connection Map is a diagrammatic representation of the

physical location of each AU-1P600/8002G in your PV installation. The virtual

array in AUSTA micro inverter gateway AUG-256 is created from the map you

create.

Complete the connection map

Each AU-1P600/8002G has a removable serial number label located on the

mounting plate. Enter this serial number into the AUG-256, and correspond it to a

number in the connection map.

Completely install all AU-1P600/8002G and all system inter-wiring connections prior

to installing the PV modules.

1. Mount the PV modules above their corresponding AU-1P600/8002G. Each

AU-1P600/8002G comes with two oppositely sexed DC connectors.

2. First connect the positive DC wire from the PV module to the negatively marked

DC connector (male pin) of the AU-1P600/8002G. Then connect the negative DC

wire from the PV module to the positively marked DC connector (female socket)

of the AU-1P600/8002G. Repeat for all remaining PV modules using one

AU-1P600/8002G for each module.