DVIGear DVI-3580a Краткое руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Переключатель DVIGear DVI-3580a. DVIGear DVI-3580a 8 страниц. 4k multiviewer switcher, scaler
Также для DVIGear DVI-3580a: Краткое руководство по эксплуатации (9 страниц)
Печатать страницу
4K MultiViewer Switcher / Scaler
Audio Capabilities
The unit supports audio embedding and de-embedded audio. It includes multiple audio output options.
The IR remote includes a button to Mute / Un-Mute the output audio. See the User Manual for full details.
HDCP Management
The DVI-3580a is HDCP v1.4 compliant. If protected content is sent to a non-compliant display, then
a full field red screen will be shown on-screen on a per window basis. Additionally, the unit also
includes an Input HDCP setting, which can be used to prevent the HDCP acknowledgment from being
sent over the HDMI and DP inputs. This feature is useful for cases in which the source device is
incorrectly sending an HDCP encrypted signal. When this is set to Off, the source devices will view
the DVI-3580a as a non-HDCP device and operate accordingly. Content that would not normally be
copy-protected such as a computer desktop will be sent without HDCP encryption; however, as usual,
protected content (e.g. from a Blu-ray player) will not be sent.
Control Options
The unit may be controlled via several options: LAN (built-in Web GUI or Telnet), RS-232, IR Remote
Control, and Front Panel selections. The most intuitive, versatile control method is the Web GUI. To
access the Web GUI, connect to the unit using the instructions on page 3. See the User Manual for
full details on operating the Web GUI as well as the other control options. The Web GUI includes the
functions below. See the User Manual for detailed explanations on all the functions of the Web GUI.
General Tab:
Use this to control or access device info, power settings, video settings, and audio settings.
Network Tab:
Use this to control or access the communication settings of the unit such as the MAC
Address, DHCP Mode, IP address, Subnet Mask, Gateway, DNS, Baud Rate, Socket, and Port Number.
EDID Tab:
Use this to perform Advanced EDID Management functions.
192.168.100.100/general.ht x
192.168.100.100/general.html
192.168.100.100/general.html
Device Info
Name (max 20 characters):
DVIGEAR
Model Number: DVI-3580a
Serial Number: DVI-150100
Unit Firmware Version: DVI 2.0.0.P_CL1116
GUI Version: 2.10_CL1092
Run Time: 8:22:8
(Days : Hours : Mins)
Video
Screen Layout
Submit
Single
Video Input Source:
W1
W2
W3
W4
1
2
3
Aspect Ratio:
W1
W2
W3
Normal
Normal
Output Resolution
Auto
Auto-Priority
Attention: This setting will take effect after reboot)
(
Submit
HDMI OUT
Input HDCP
Submit
On
VGA Auto Adjust
Submit
Video OSD
Submit
On
General
Network
Submit
Submit
4
W4
Submit
Normal
Normal
Submit
© 2015 DVIGear, Inc. | +1.770.421.6699 | [email protected] | Contact Support
Quick Start Guide
EDID
System
Power
Power Saving (0 - 60 min.)
On
Restart Device
Reset to Factory Defaults
Audio
Audio Input Source
1
Audio Input Config:
1
2
Auto
Auto
4
5
Auto
Auto
All Audio Mute
Off
HDMI / HDBT Output Audio Mute
Audio OSD
On
DVI-3580a
4K MultiViewer Switcher / Scaler
Submit
0
Submit
Reset
Audio Volume (0 - 10)
Submit
5
3
Auto
6
Submit
Auto
Audio Delay (0 - 10)
Submit
0
Submit
Off
Submit
DVI-3580a
7