Dateq Apollo Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальный микшер Dateq Apollo. Dateq Apollo 11 страниц.

Microphone / Line Channels (1 and 2)

These two channels have been designed to connect microphones. They are equipped with an input

selector, volume control, a 3-way tone control optimized for voice, crossfader routing selector and

pre-fader listening.

Mic / Line

GAIN

HIGH

MID

LOW

A / MASTER / B Signal-routing selector. When switched to A, the signal goes

PFL

FADER

Input selector. Normally the Mic input is selected. Pushed in is

Line (CD, MD, tape). LEDs indicate which input is selected.

Determines the pre-adjustment of the volume for both the Mic

as well as the stereo Line input.

High tones control.

Mid tones control.

Low tones control.

via the A-side of the crossfader (left LED is lit) to the master

output. In position B, the signal goes via the B-side of the

crossfader (right LED is lit) to the master output. In the

MASTER position, the signal goes directly to the master.

Switches pre-fader listening on and off. When this function is

active, the headphone will switch to PFL and the input signal of

one or more inputs can be heard even though the fader is

closed. A LED will indicate whether the PFL-function on this

channel is active. When no PFL has been selected on any

channel, the master signal can be heard via PFL.

100 mm fader through which the volume of this channel can be

determined precisely. The volume of a channel is also

controlled by the crossfader if the channel is routed to the A- or

B-side of the crossfader.