4qd SCC-001 Руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Блок управления 4qd SCC-001. 4qd SCC-001 3 страницы.

Connections

The SCC-001 was designed to work with the DNO series of controllers and can be

plugged directly into the expansion port of the DNO. The pin connections are shown

below.

The SCC-001 can also work with other controllers by feeding a speed related positive

voltage into the speed terminal, and then adjusting the pot as required.

The SCC-001 has an upper voltage limit of 30V.

Adjustment

For use with the DNO the pot should be adjusted fully clockwise. This gives a full

speed output for an input voltage of ~8V. For higher input voltages the pot should

be adjusted so that the maximum output signal corresponds to the vehicle top

speed.

SCC-001 V1.1 07/19

Page 2