AUSTRALIAN MADE GREAT MATE Инструкции по установке и настройке - Страница 15

Просмотреть онлайн или скачать pdf Инструкции по установке и настройке для Двигатель AUSTRALIAN MADE GREAT MATE. AUSTRALIAN MADE GREAT MATE 20 страниц. Double swing gate motor kit

Печатать страницу

Some double gates require a time delay in opening / closing to prevent the two gates clashing.

Determine which gate will need to open first & therefore close last. Typically, one or other of

the gates may be fitted with a 'lip' or 'tab' to help align the gates when closed. The lip or tab

may be fitted to the leading edge of the first-closing gate or the trailing edge of the last-closing

gate.

The motor (master motor or slave motor) of the first opening gate / last closing gate must be

connected to Motor 1 terminal.

Motor M1 Terminals

First Opening Gate /

Last Closing Gate

To set the gate delay time for the open delay / close delay flick DIP switch 1 to 'ON'. Press and

hold down "OPN" button for the required open delay / close delay time you need and release the

button. For example if you want a 15 second open delay / close delay time then press and hold

down the "OPN" button for 15 seconds and release the button. Once open delay / close delay

time is set, flick DIP switch 1 back to OFF.

To turn on the open delay / close delay time, flick DIP switch 2 to 'ON' and leave it on. To turn off

the open delay / close delay time function flick DIP switch 2 back to 'OFF'.

Dip Switch 1

'OFF'

WARNING: Care should be taken as there are moving components inside the

gate motor that may cause damage or personal injury.

GATE MOTOR

INSTALLATION AND SET UP

INSTRUCTIONS

Gate Open Delay / Close Delay Adjustment

Press and hold 'OPN'

button to set required

delay time

Setting the Open delay / Close Delay Time

Dip Switch 2 'ON' to turn on open / close time delay

Flick Dip Switch 1 to 'ON' to set

time. Flick back to off when finished