AUSTRALIAN MADE GREAT MATE Installation And Setup Instructions - Page 15

Browse online or download pdf Installation And Setup Instructions for Engine AUSTRALIAN MADE GREAT MATE. AUSTRALIAN MADE GREAT MATE 20 pages. Double swing gate motor kit

Print Page

Some double gates require a time delay in opening / closing to prevent the two gates clashing.

Determine which gate will need to open first & therefore close last. Typically, one or other of

the gates may be fitted with a 'lip' or 'tab' to help align the gates when closed. The lip or tab

may be fitted to the leading edge of the first-closing gate or the trailing edge of the last-closing

gate.

The motor (master motor or slave motor) of the first opening gate / last closing gate must be

connected to Motor 1 terminal.

Motor M1 Terminals

First Opening Gate /

Last Closing Gate

To set the gate delay time for the open delay / close delay flick DIP switch 1 to 'ON'. Press and

hold down "OPN" button for the required open delay / close delay time you need and release the

button. For example if you want a 15 second open delay / close delay time then press and hold

down the "OPN" button for 15 seconds and release the button. Once open delay / close delay

time is set, flick DIP switch 1 back to OFF.

To turn on the open delay / close delay time, flick DIP switch 2 to 'ON' and leave it on. To turn off

the open delay / close delay time function flick DIP switch 2 back to 'OFF'.

Dip Switch 1

'OFF'

WARNING: Care should be taken as there are moving components inside the

gate motor that may cause damage or personal injury.

GATE MOTOR

INSTALLATION AND SET UP

INSTRUCTIONS

Gate Open Delay / Close Delay Adjustment

Press and hold 'OPN'

button to set required

delay time

Setting the Open delay / Close Delay Time

Dip Switch 2 'ON' to turn on open / close time delay

Flick Dip Switch 1 to 'ON' to set

time. Flick back to off when finished