dymax 485 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Блок управления dymax 485. dymax 485 16 страниц. Needle valve
Также для dymax 485: Руководство пользователя системы (16 страниц), Руководство пользователя (16 страниц)

Model 485 Dispensing Valve User Guide

There are two 8-32 UNC holes on the dispense valve for mounting purposes (Figure 5).

System Interconnect

Figure 3. Valve Interconnect Diagram

Material Reservoir

(20 oz Cartridge

Reservoir Shown)

Air In

Model 485 Valve

Air

Once the dispense valve is secured to its mounting surface, connect the airline to the

port provided on the valve (Figure 3). Also connect your air supply (60-80 psi) to your

valve controller or 3-way solenoid valve (a valve controller or a 3-way solenoid valve

must be used to operate the Model 485 valve (CV of .01 or greater)). Please refer to the

valve controller user guide for detailed instructions.

Fluid

The Model 485 valve requires a material reservoir or pressure tank to draw material

from. The material reservoir should be connected to the 485 valve through the material-

in port (Figure 3) located on the valve body.

Precision Air Regulator

(Recommended)

Material In

Air Filter Regulator

with Dump Valve

(Recommended)

Valve Controller or

Solenoid Valve

(DVC-345 Shown)

Air

Supply