dymax 828 Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Блок управления dymax 828. dymax 828 16 страниц. Disposable fluid path dispensing valve

Печатать страницу

Mounting

Note: If the dispense valve is to be mounted in an area that limits access to the valve, it

is recommended that the set-up operation be done prior to mounting. Access to

various surfaces of the valve is necessary for periodic adjustment (see Specifications).

There is a 0.25" [0.64 cm] mounting hole through the side of the dispense valve for

mounting purposes (see Figure 8).

System Interconnect

Air

Once the dispense valve is secured to its mounting surface, connect the air lines to the

ports provided on the valve (Figure 4). Connect the air supply (75-100 psi [5.1- 6.9 bar])

to the valve controller or 4-way solenoid valve.

Figure 4.

Air-In Port

Air-In Port (Normally Open)

Valve Adjustments

Adjusting Material Flow

To adjust the flow of the Model 828 valve, turn the Pinch-Piston Flow Adjustment Screw

(Figure 5, A) clockwise to decrease material flow or counterclockwise to increase

material flow.

U S E R G U I D E

M O D E L 8 2 8 D I S P E N S I N G V A L V E