dymax 828 Kullanıcı Kılavuzu - Sayfa 10

Kontrol Ünitesi dymax 828 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dymax 828 16 sayfaları. Disposable fluid path dispensing valve

Mounting

Note: If the dispense valve is to be mounted in an area that limits access to the valve, it

is recommended that the set-up operation be done prior to mounting. Access to

various surfaces of the valve is necessary for periodic adjustment (see Specifications).

There is a 0.25" [0.64 cm] mounting hole through the side of the dispense valve for

mounting purposes (see Figure 8).

Air

Once the dispense valve is secured to its mounting surface, connect the air lines to the

ports provided on the valve (Figure 4). Connect the air supply (75-100 psi [5.1- 6.9 bar])

to the valve controller or 4-way solenoid valve.

Figure 4.

Air-In Port

Air-In Port (Normally Open)

Adjusting Material Flow

To adjust the flow of the Model 828 valve, turn the Pinch-Piston Flow Adjustment Screw

(Figure 5, A) clockwise to decrease material flow or counterclockwise to increase

material flow.

U S E R G U I D E

M O D E L 8 2 8 D I S P E N S I N G V A L V E