Gage Bilt GB745 Руководство - Страница 9
Просмотреть онлайн или скачать pdf Руководство для Инструменты Gage Bilt GB745. Gage Bilt GB745 13 страниц. Installation tool
Также для Gage Bilt GB745: Руководство пользователя (13 страниц)
Печатать страницу
HEAD
Remove nose assembly from tool before attempting disassembly of head assembly.
Remove end cap (745816). Push against threaded end of piston (745310) to slide it out of head cylinder (745366). Be
careful not to damage threads or cause burrs on polished piston rod surface.
WARNING:
DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH ALL ENVIRONMENTAL LAWS AND REGULATIONS
APPLICABLE TO YOUR AREA.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242
and torque the four button-head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage around the gasket.
401092 - BACK-UP RING
753101 - NOSE FITTING
480124 - NUT
403815 - O'RING
745366 - HEAD CYLINDER
480101 - PINTAIL TUBE
480125 - RETAINING NUT STOP
405889 - O'RING
745310 - PISTON
401119 - BACK-UP RING
402482 - BUTTON HEAD SCREW (2)
S572 - STAT-O-SEAL (2)
A-261 - O'RING
9
756120 - DEFLECTOR
A-820 - O'RING
401105 - BACK-UP RING
403846 - O'RING
401119 - BACK-UP RING
745816 - END CAP
Rev. 1/14