Gage Bilt GB902 Руководство - Страница 3
Просмотреть онлайн или скачать pdf Руководство для Инструменты Gage Bilt GB902. Gage Bilt GB902 9 страниц. Hydraulic powerunit
Печатать страницу
Please read this manual before servicing or using this tool. Complete
with warnings and cautions to prevent severe personal injury or damage
Keep dirt and other foreign matter out of hydraulic systems of tools, hoses, couplers and
powerunit . Do not let hose fittings and couplers contact a dirty floor or unclean working
surface. Foreign matter in hydraulic fluid may cause tool and the powerunits valves to
WARNING
Do not pull fastener unless it is placed in
an assembly, pin will eject forcibly when
pintail breaks off. Severe personal injury
may result.
CAUTION
Insure that nose assembly is properly
matched for the fastener being installed.
WARNING
When operating installation equipment
always wear approved eye protection. Do
not look in front of nose assembly or rear
of tool when installing fastener.
WARNING
Installation of fasteners may exceed
acceptable noise levels. Use approved
hearing protection.
WARNING
Proper pull and return pressures are
important for proper function of
installation tools. Severe personal injury
or damage to equipment may occur
without correct pressures.
NOTE:
the tool.
CAUTION:
malfunction.
Be sure there is adequate clearance for
tool and operator's hands before
proceeding. Keep fingers clear of any
moving parts. Keep fingers clear from
fasteners and installed materials. Severe
personal injury may result.
Always disconnect tool from powerunit
before performing any maintenance to
any tool or nose assembly. Insure that all
connections are proper and there are no
visible leaks from tool or hoses before
connecting to power.
Hydraulic power units that deliver high
pressure for the "PULL" and "RETURN"
and are not equipped with relief valves
are specifically not recommended and
Keep Nose Assemblies clean and free of
3
WARNING
WARNING
WARNING
may be dangerous.
CAUTION
chips and debris.