Gage Bilt GB752 Информация об инструментах для установки - Страница 4

Просмотреть онлайн или скачать pdf Информация об инструментах для установки для Заклепочные инструменты Gage Bilt GB752. Gage Bilt GB752 13 страниц.
Также для Gage Bilt GB752: Оригинальное руководство по эксплуатации (20 страниц), Информация об инструментах для установки (12 страниц)

PRINCIPLE OF OPERATION

When the actuator lever assy is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the

valve spool assy causing the air to be redirected. The air is directed to the top of the air piston assy, moving it in a downward

direction. The air below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of the tool.

Simultaneously, the piston rod assy connected to the air piston assy is also moving down, forcing hydraulic oil up and into the front

side of the head cylinder assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the

attached nose assembly are also moving with the piston to start the fastener installation. When the fastener installation is completed,

the actuator lever assy is released. Air pressure is then built up inside of the handle assy causing the valve spool assy to return to its

original position and reversing the sequence directing air pressure to the rear of the head cylinder assy, causing the piston to move to

the forward position.

CYLINDER

HEAD

OIL

PRESSURE

AIR

PRESSURE

AIR

PISTON

S/N: 3210 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

HEAD

PISTON

ROD

AIR

PRESSURE

VALVE

SPOOL

EXHAUST

Image may not reflect actual tool

AIR

PRESSURE

AIR

PISTON

AIR

PRESSURE

AIR

PRESSURE

AIR

PRESSURE

REV.11/14

AIR