Hi-Force HHP30 Инструкции по эксплуатации и технике безопасности - Страница 3
Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и технике безопасности для Промышленное оборудование Hi-Force HHP30. Hi-Force HHP30 4 страницы. Hydraulic hole punch
Печатать страницуTDS1312
PREPARATION FOR USE
Refer to figure 2 for identification of parts.
Select the size of punch required based on the hole size that needs to be made
(Refer to Figure 1 for punch / die sizes).
Slacken the die retaining screw in the side of the anvil, and fit the die into the
recess with the identification spot upwards. Tighten the die retaining screw.
Unscrew and remove the locking collar using the tommy bar provided. Fit the
punch into the locking collar in the direction shown in figure 3.
Ensure that the identification spot on the punch is the same colour as that on
the die.
Figure 2. Component Identification (HHP30)
Figure 3. Punch assembly
Page 3 of 4
Rev 2. ECO No. 3890