Great Little Trading Paddington Руководство - Страница 6
Просмотреть онлайн или скачать pdf Руководство для Внутренняя отделка Great Little Trading Paddington. Great Little Trading Paddington 10 страниц. Bunkbed
Печатать страницу
STEP 3: It is suggested this step is completed on the floor.
Using the dowels, assemble the bed end by locating one of the prepared upper
bunk headboards (G) and headboard rails (E) into the upper section of the LH
assembled leg, then locate the lower bunk headboard (F) and headboard rail
(E) into the lower section of the LH assembled leg as shown.
Please note the IMPORTANT orientation guidance below on both
panel E's.
Once all 4 panels are in place locate the RH assembled leg into place.
Repeat this for the second bed end.
G
E
F
E
IMPORTANT: The orientation of BOTH
panel E's is important and if assembled
upside down, it will cause alignment issues
later on in the assembly.
Note the dowels on ends of panel E are
not centralised. Please ensure that the 2x
dowels are closest to the bottom edge
of the panels/rails.
STEP 4:
Secure panels G & 2x E to the assembled legs using 8x 30mm SHORTER wood screws
(#8).
Note: Hardware #9 is very similar in size (35mm), but will damage the panels if used.
Please check before using.
Repeat step with second bed end.
6
G
#8
E
#8
#8
F
#8
E
#8
Hardware for Step 4:
#8
16x #8 Screws 30mmL
#8
#8
#8