Aircraft PSCRUBWHT Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Оборудование для уборки Aircraft PSCRUBWHT. Aircraft PSCRUBWHT 12 страниц.

Aircraft PSCRUBWHT Руководство пользователя
Using your
1. Select an attachment. To use one of the 3 brush heads (Round, Flat
or Pointed), insert the rotating triangular shaft at the tip of the
POWERSCRUB into the corresponding opening in the centre of the
Brush head, and twist clockwise. To remove, simply twist in an
anticlockwise direction and detach.
2. To use the grey microfibre Pad or the sponge Pad, simply attached to
the pad holder using Velcro, and attach the Pad holder to the
POWERSCRUB as above. Please ensure that the Pad is placed
centrally on the Pad holder.
3. You may choose to use your POWERSCRUB with or without the
handle extension installed. To install, simply click into place. To
remove, press the Handle release button, and pull to detach.
4. You may also choose to moisten surfaces using a spray bottle
containing water or cleaning solution, before going over with your
POWERSCRUB.
5. Adjust the hinge to your preferred angle.
6. Press the Start/Stop button. The LED light on the handle will illuminate
green and the Brush head/Pad will start to rotate at 180rpm. Press
again to switch to high-speed mode (250rpm) – the Speed Indicator
light will now turn red. To turn off, press the Start/Stop button once
again. You may also hold down the button for 3 seconds when in low
speed mode to switch off.
7. You may submerge the rotation shaft (the section below the hinge) of
your POWERSCRUB in water for short periods. Do not allow the
section above the hinge to become submerged in water.
POWERSCRUB
6