75F Smart Damper Инструкции по установке и эксплуатации

Просмотреть онлайн или скачать pdf Инструкции по установке и эксплуатации для Противопожарные и дымовые клапаны 75F Smart Damper. 75F Smart Damper 3 страницы.

75F Smart Damper Инструкции по установке и эксплуатации
|
APPLICATION
The 75F® Smart Damper™ is to be used as part of the 75F®
Dynamic Airflow Balancing™ solution. The Smart Damper will be
paired with a 75F® Smart Node™ which will provide power and
control.
|
PRECAUTIONS
Be sure Smart Node is accessible for wiring.
When installing multiple dampers in a zone, only provide the
24VAC power bus line to one of the two Dampers. The Smart
Node will be attached to the primary damper.
Failure to wire devices with the correct polarity when using a
shared transformer may result in damage to any device
powered by the shared transformer.
Disconnect power before installing. Never connect or
disconnect wiring with the power applied.
Do not run the low voltage wiring in any conduit with line
voltage.
Install in accordance with all State and local codes.
|
FEATURES
Modulation of airflow through the duct controlled by the 75F
Dynamic Airflow Balancing™ solution.
Monitors airflow temperature.
|
SPECIFICATIONS
Smart Damper
Supply Voltage: 24VAC
Operating Environment: 41°F – 122°F
Dimensions: (H) 6"; Diameter 6, 8, 10, 12", or custom sizes
Enclosure: Metal sheath
INSTALLATION & OPERATION INSTRUCTIONS
75F® Smart Damper™ | RADIAL
www.75f.io
888.590.8995 x2