GREAT PLANES fokker DR-1 Руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Игрушка GREAT PLANES fokker DR-1. GREAT PLANES fokker DR-1 20 страниц.

❏

6. Study the above drawing carefully. It shows the direction

and placement of the remaining 8 strut mounts and the four

struts. Be sure to insert and remove a 2mm x 6mm [5/64" x

15/64"] self-tapping screw through each one and apply thin

CA into each hole to harden the threads.

❏

7. Use 2mm x 6mm [5/64" x 15/64"] self-tapping screws to

secure the struts as shown.

Install the Sub-Wing & Landing Gear

❏

1. Carefully thread the axle through the sub-wing and

attach the rear landing gear strut followed by the front landing

gear strut as shown. The rear strut is identiﬁ ed by a second

hole near the axle hole.

❏

2. Secure the sub-wing to the landing gear with two 2mm x

6mm [5/64" x 15/64"] self-tapping screws as shown. Remove

the screws and harden the holes with thin CA. Then, reinstall

the screws.

❏

3. Attach the landing gear to the bottom of the fuse with

four 2mm x 7mm [5/64" x 9/32"] self-tapping washer head

screws. Remove the screws and harden the holes with thin

CA. Then, reinstall the screws.

❏

4. On each end of the axle, place a 3mm [1/8"] washer

and 3mm [1/8"] nut with threadlocker, followed by another

3mm [1/8"] washer and the wheel. Secure the wheel in place

with a 3mm [1/8"] washer and 3mm [1/8"] nut. Apply a drop

of threadlocker to the nut.