Automatic Solutions ABK Руководство по установке и эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Система внутренней связи Automatic Solutions ABK. Automatic Solutions ABK 17 страниц. Gsm intercom system

Печатать страницу

Please read this entire manual before attempting to install this system.

This system should only be installed by a professional automatic gate installer or access control

specialist dealer.

It is recommended that the system be set up, configured, commissioned and tested on a

workshop bench before taken to site for installation.

Before installing this system, you need to be sure that there is good mobile GSM cell coverage in

the area it is to be installed. It is recommended that you conduct a site survey, and check

reception on the site for a GSM network. If reception is poor in the area, then this system is not

recommended.

You will need a SIM card in order to use this system. It should be a regular voice and SMS text

SIM card. Do not use a data only SIM, as this is only for tablets and will not work in the unit.

TIP: Most technical calls received are due to installers using CAT5 or alarm cable to power

the unit. Neither are rated to carry enough power (1.2 amp peak). Please use following

cable...

Up to 2 metres (6 feet) – Use minimum 0.75mm

Up to 4 metres (12 feet) – Use minimum 1mm

Up to 8 metres (24 feet) – Use minimum 1.5mm

Using insufficient power cable thickness will cause excessive stress on electronic components,

and therefore void the manufacturer's warranty.

15v Power

adaptor

To avoid such problems it is recommended (and is good practice) to locate the power supply as

close to the transmitter as possible. This avoids power cable noise and interference and enhances

the lifetime of the product.

P a g e

| 3

Overview of System

Site Survey

SIM Card

1) Ensure the SIM has calling credit, and can make and

receive calls on a mobile cell phone.

2) Check that the SIM is not locked to a phone and can be

used in other devices.

3) Check that the SIM does not have a PIN code request.

4) You are now ready to begin programming

Power

(18 gauge)

(16 gauge)

(14 gauge)

15v

Power

adaptor