HID VertX EVO V1000 Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для Контроллер HID VertX EVO V1000. HID VertX EVO V1000 19 страниц.
Печатать страницу
VertX EVO V1000 Installation Guide
Introduction
HID's VertX EVO open platform is flexible and scalable to permit economic and high performance access control
solutions for a wide range of applications. The VertX EVO V1000 interconnects through different sub-networks and
protocols to a standard TCP/IP network with the capability of a variety of applications.
For example, the VertX EVO Access Controllers are a cost-effective method for two-way communication using Ethernet
between a computer and a V1000. In addition, the VertX EVO V1000 communicates through a RS-232 serial port and
multi-drop RS-485 ports.
Parts List
Description
VertX EVO™ units (one of the following):
V1000 (Access Controller)
Note: Each VertX EVO controller has a plastic base and is covered with a plastic lid.
- Lithium Battery
- Mounting screws
- 2.2K EOL resistors
- Quick Installation Guide
- Installation Wiring Diagram Example
Note: One or more VertX Interface panels are required when installing a VertX EVO V1000 controller.
Product Specifications
Description
Power Supply
Maximum Current at 12-24VDC per Unit
Average Operating Current at 12VDC
Operating Temperature Range
Humidity
SD Card
USB Port
Cable Specifications
Cable Type
RS-485 *
4000 feet (1220 m) to host
Input Circuits *
500 feet (150 m)
Output Circuits *
500 feet (150 m)
500 feet (150 m) to reader
Wiegand
Ethernet
328 feet (100 m)
Power Supply
----
12-24 VDC IN
* Minimum wire gauge depends on cable length and current requirements.
July 2011
Specification
12-24VDC
1 Amp
210mA
32°-120°F (0°- 49°C)
5% to 85% non-condensing
Reserved for Future Use
Reserved for Future Use
Length
Using Belden 3105A, 22AWG twisted pair, shielded 100 cable, or
equivalent.
2-conductor, shielded, using ALPHA 1292C (22AWG) or Alpha 2421C
(18AWG), or equivalent.
2-conductor, using ALPHA 1172C (22AWG) or Alpha 1897C (18AWG),
or equivalent.
ALPHA 1299C, 22AWG, 9-conductor, stranded, overall shield.
Fewer conductors needed if all control lines are not used.
Cat5, Cat5E, and Cat6
Refer to your Power Supply Installation Guide.
© 2003 - 2011 HID Global Corporation. All rights reserved.
Quantity
1 V1000 used with
any combination of
(up to 32) interface
panels.
1
4
8 ea V1000
1
1
Specification
Page 3 of 19