Automation Dr. Nix QNix 5500 Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы Automation Dr. Nix QNix 5500. Automation Dr. Nix QNix 5500 16 страниц.
Также для Automation Dr. Nix QNix 5500: Руководство по эксплуатации (20 страниц), Краткое руководство по эксплуатации (12 страниц)

4.6. Delete User's Adjustment

Pressing and holding the button until the countdown for switch-off starts will delete the last measure-

ment results. If you repeat this three times within 5 seconds, the user's adjustment will be deleted also –

the gauge goes back to factory status. When exceeding 5 seconds the counted repeats are set back to 0.

In case of a user's adjustment, the according symbol is shown in the status bar.

After deleting the user's adjustment the symbol disappears; factory adjustment is now active.

If the device is not responding as expected, please check the following items:

Error

Device does not switch on

Calibration with reference plates

produces implausible results.

Sensor ring lights up blue

Sensor ring briefly lights up blue

during probe change

Possible cause

Batteries drained

Incorrect reference plate selected

Device or probe defective

Measuring range exceeded

no error

Action

Replace the batteries

Select the reference plate

Fe/NFe based on your probe

Please contact your authorised

service location.

Probe is connected correctly