Automation Dr. Nix QNix 5500 Руководство по эксплуатации - Страница 14
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы Automation Dr. Nix QNix 5500. Automation Dr. Nix QNix 5500 16 страниц.
Также для Automation Dr. Nix QNix 5500: Руководство по эксплуатации (20 страниц), Краткое руководство по эксплуатации (12 страниц)
Печатать страницу
QNix
5500
®
7.2.2. Probe Electrical Data
The probes may only be used with the gauges QNix® 9500 and QNix® 5500.
7.3. Measuring Data
Measuring Data
Principle of Measurement
As per standard (varies by model)
Status indication
Probe type
Measuring range
Measuring interval
Units
Display resolution
Measurement uncertainty*
(based on factory standards)
Minimum measuring area (Ø)
Minimum curvature radius, convex
Minimum thickness of the base material
* Accuracy may deviate outside a range of -5 °C to 65 °C, but not more than the factor 2 of the
measurement uncertainty..
14
Fe
Magnetic field principal
Magnetic field change,
Hall effect
DIN EN ISO 2808,
DIN EN ISO 2178
DIN 50981, DIN 50984, BS 5411 (3 & 11), BS 3900-C5,
ASTM B 499, ASTM D 1400, ASTM D 1186, ASTM D 7091
by RGB-LED at the probe
See probe data sheet
Varies depending on probe type
≥ 100 measurements / min.
μm / mil (setting in battery compartment)
0,01 μm
± (1 μm + 2 %) to 2 mm
± 3 % from 2 mm
14,5 mm
6 mm
100 μm
NFe
Magnetic field principal
Eddy current
DIN EN ISO 2808,
DIN EN ISO 2360
± (2 μm + 2 %) to 2 mm
± 3 % from 2 mm
14,5 mm
50 mm
50 μm