DynaLock 2000 Series Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для По замкам DynaLock 2000 Series. DynaLock 2000 Series 12 страниц. Electromagnetic lock
Также для DynaLock 2000 Series: Руководство (6 страниц)

Печатать страницу

DynaLock

705 Emmett Street

Ph/ 860.582.4761

The Series 3001xTJ31 is a 700 pound holding force top jamb-mounted electromagnetic lock designed to secure a

double-inswinging pair of doors. The lock requires both installation procedures as described herein and in the

separate wiring instructions included.

Typical installations of the lock on double-inswing doors:

Care must be taken that the lock face and armature face are kept free of dirt, rust, paint, or any other obstruction

which may interfere with the lock and armature making good contact. These faces may be cleaned with a non-

abrasive pad and wiped with an oil dampened cloth.

Familiarize yourself with the door and frame conditions. The lock must mount rigidly to the face of the door frame

header. The door mounted armature is supplied with an adjustable mounting bracket and hardware that allows it to

pivot slightly to compensate for reasonable misalignment.

After mechanical installation is complete the lock needs to be wired to a 12 or 24 VDC/VAC power source. Once low

voltage power is supplied the unit is fully operational. All other wiring is for selected options. Refer to the separate

wiring instructions included for further information.

3001xTJ31 MANUAL - FORM 3001TJ-001

Bristol, CT 06010

Fx/ 860.585.0338

INSTALLATION DESCRIPTION

HANDLING

MECHANICAL INSTALLATION

ELECTRICAL INSTALLATION

SERIES 3001xTJ31

ELECTROMAGNETIC LOCK

INSTALLATION INSTRUCTIONS

Page 1

11/02