DynaLock 2000 Series Руководство по установке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по установке для По замкам DynaLock 2000 Series. DynaLock 2000 Series 12 страниц. Electromagnetic lock
Также для DynaLock 2000 Series: Руководство (6 страниц)
Печатать страницу
DynaLock
705 Emmett Street
Ph/ 860.582.4761
1.
Individual door and frame conditions
may vary. Dimensions shown at right
are for a typical hollow metal door and
frame.
2.
The lock assembly should be mounted
to the center of the frame header for
maximum performance. Verify that
there is proper clearance for the lock
assembly at the planned mounting
location.
1.
Drill out the four dimpled mounting hole locations inside the
back of the lock housing using a 3/16" drill. Position the lock
assembly on the face of the frame header, on the pull side of
the door, as shown. Locate and mark the centers of the four
mounting holes.
2.
Drill the marked holes in the face of the frame header:
a. Four (4) 1/8" dia. slotted mounting holes, 1" deep.
Attach the lock mounting bracket to the frame header using
3.
four (4) #10 x 1" pan head Tek screws. Firmly tighten the
screws using a #2 phillips screwdriver.
1/8"
ABOVE
HEADER
RABBET
3001xTJ31 MANUAL - FORM 3001TJ-001
Bristol, CT 06010
?
Fx/ 860.585.0338
?
MOUNTING CONSIDERATIONS
INSTALL THE LOCK ASSEMBLY
4-9/16"
SERIES 3001xTJ31
ELECTROMAGNETIC LOCK
INSTALLATION INSTRUCTIONS
LOCK ASSEMBLY
1/8" GAP
1/8" GAP
DOOR
L
CENTERLINE
MOUNTING HOLES
Page 2
ARMATURE
2-7/16"
1-1/4"
ARMATURE BRACKET
MOUNTING SCREW
5"
REF
11/02