Autometers Systems IC 995 Руководство по установке и эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Измерительные приборы Autometers Systems IC 995. Autometers Systems IC 995 10 страниц. Electrical network analyser

Печатать страницу

The two keys with arrows pointing left and right

or down.

E.g. The address number is highlighted with the ﬁrst number on the left "001", to

change this to "015" read below.

First press the key with the arrow pointing down

stop to the right. Now press the key with the arrow pointing to the right

increment the number stop when you reach 1, now press the key with the arrow

pointing down

this will move the cursor one stop to the right. Now press the key

with the arrow facing to the right, this will increment the number stop when you

get to number 5 now the numbers should look like "015" press the key marked with

the arrow facing down, The cursor has now dropped to the level below.

b. Baude

Rate:

This is normally defaulted to 9600 and works with almost all management systems.

If, however, you want to change this you have five choices 2400, 4800, 9600, 19200

and 38400.

To alter to the new settings press the key with the arrow marked facing the right

this will scroll through your choices, stop at the correct one.

Now you have set the address and baud rate. To program into the meter you must

press the return key

you will notice that a box appears which has "YES" "NO".

Press the key with the arrow facing to the left

"YES" press return

, you have now set the parameters. Press "Menu" to return to

Conﬁg list.

PASSWORD: To alter the password.

The meter has been designed for customers or

companies to have their own individual password

protection. To alter the password ﬁrst take the steps

of writing down your chosen password and

keeping it in a secure place.

Press the key with the arrow facing down

should now highlight the word "PASSWORD" press

return

You will notice on the display screen "old 0001" and on the line below "New". You

will notice that the cursor is already positioned on the ﬁrst "0" for you to alter the

number. Press the key with the arrow facing down

right and the key with the arrow to the right

increment the number up

this will move the cursor one

this will

, you have now highlighted the

Password

OLD = 0001

NEW = 0001

, this

to move the cursor to the

to increment the number.

When you have entered your new number in press return

with "YES NO"

. Move the cursor over the the left by pressing the key with

YES

the arrow facing left

. Press Menu to return you to Conﬁg screen.

TARRIF: Please note this is NOT activated in this meter.

TIME

Press the key with the arrow facing down

the Time is highlighted. Press return

you into Time screen. The cursor will now be over

the ﬁrst digit to the left (the date). Using the key

with the arrow facing the right

this will

increment the number. Press the key with the

arrow facing down

to move the cursor one step

to the right and again press the key with the arrow

facing the right

to increment. Repeat this until

the date is complete. When the last digit to the

right has been entered press the key with the arrow facing down

the cursor down to the time. Repeat using the keys as above until the time has

been entered. When the time has been completed press return

A box will appear with "YES" and "No" in it

facing left

the cursor has now moved over the "YES" . Press return

now programmed the time.

Press Menu. This returns you to conﬁg screen.

D.RELAYS: SETTING

Press the key with the arrow facing down

This now moves you down and has highlighted

Switching. Press return

This takes you to the "D RELAYS" programming

section, you will notice on the display that there are

numbers 1 and 2. This is because there are two

output relays.

: Can be conﬁgured to 3 positions: Level, Pulse or Alarm.

Digital output 1

: Can be conﬁgured to only 2 positions: Level and Pulse.

Digital output 2

: the internal relay of the ic 995 is operated by an external pc enabling

Level means

a contactor or breaker to be switched open circuit.

. A box will appear

TIME

until

, this takes

10-22-2009

11: 03: 28

this will drop

, press the key with the arrow

YES

this has

D.RELAYS

1 D01=

0000ms

2 D02=

0000ms

LEV

PULSE

ALARM