Dynamicnord SBC-20 Руководство - Страница 13
Просмотреть онлайн или скачать pdf Руководство для Спорт и активный отдых Dynamicnord SBC-20. Dynamicnord SBC-20 19 страниц. Buoyancy compensator
Печатать страницуWARNING
Due to the excessive strain, BCDs in rental/dive centers or
used professionally or subjected to intensive use must be
checked at least every six months. The general condition
as well as the most important safety components such as
the air bladder, the valves, the corrugated hose, and the
inflator must be inspected. If any of the above components
show signs of wear or do not perform properly, they must
be replaced immediately, or the BCD must be discarded if
replacement is not possible.
Specifications
Operating temperatures
Air
-20°C
to
+50°C
Water
-2°C
to
+40°C
WARNING
Specific cold water diving instructions and the proper use of
this product in cold water are required before diving in water
temperatures below 10ºC (50ºF). These instructions are not
included in this manual.
24
-4°F
to
122°F
28°F
to
104°F
Low pressure hose / inflator valve
Operating pressure of low pressure
hose and inflator valve
Thread size of low pressure hose
O-ring seals
WARNING
The product is designed for use with air or nitrogen/oxygen
mixtures containing up to 40% oxygen.
The use of gas mixtures containing a higher percentage
of oxygen or containing other substances can lead to
corrosion, wear, premature aging or failure of metal or
rubber components. This can result in loss of buoyancy
control or air tightness of the BCD and injury or death. Non-
conventional gas mixtures also pose the risk of fire and
explosion.
Disposal
When your BCD is worn out / beyond repair, dispose of it in
accordance with your national waste regulations.
WARNING
DO NOT REMOVE THE SEWED ON LABELS. THE LABELS
SHOW MANDATORY DETAILS ABOUT THE PRODUCT
AND THE DATE OF MANUFACTURE. IN THE EVENT OF
A WARRANTY CLAIM, PROOF OF PURCHASE DATE IS
REQUIRED.
95 – 200 psi (6.5 – 13.8 bar)
3/8 – 24 UNF
EPDM - Buna/Nitrile - Silicone
25