Dynamicnord SBC-20 Руководство - Страница 15

Просмотреть онлайн или скачать pdf Руководство для Спорт и активный отдых Dynamicnord SBC-20. Dynamicnord SBC-20 19 страниц. Buoyancy compensator

Печатать страницу

Risk assessment and management

Possible risks when using the BCD

NOTE: Risk assessment is not an exact science, but tries to describe

all conceivable scenarios.

Your BCD is part of the diving equipment. The use is thus limited to

diving in water.

Your BCD enables you to control buoyancy

and, in an emergency, to return to the surface.

Your BCD is designed to ensure safe operation of your inflatable

buoyancy compensator for diving and carrying systems, which meets the

requirements and tests of the harmonized standard EN1809: 2014 + A1:

2016.

WARNING

IT IS VERY IMPORTANT THAT DISCOMFORT IS RECOGNIZED

AS A DANGER SIGNAL. AVOID HYPERTHERMIA AND

HYPOTHERMIA AS BOTH ARE HARMFUL AND CAN LEAD

TO DEATH. MONITOR YOUR PERFORMANCE DURING

ALL DIVING ACTIVITIES AND AVOID EXCESSIVE AIR

CONSUMPTION, FATIGUE, OVERHEATING AND OTHER

CAUSES.

POSSIBLE ALLERGY RISKS

A small percentage of the population suffers from allergies to fabrics

used in the BCD. Allergic symptoms can range from mild to severe

skin irritation or itching. It is the user's responsibility to determine

if he or she has any allergies or to determine this while using the

BCD. It should not be used until the problem can be solved. The

DYNAMICNORD BCDs are not designed for use on bare skin and may

only be worn over a suitable diving suit to avoid friction on the skin.

Fault finding

PROBLEM

CAUSES

B E F O R E T H E D I V E

The

Improper use,

Buoyancy

mouthpiece,

transport or

cannot be

the manual

storage. Wear

guaranteed

drain valve

and tear of

during the

and/or the

components.

dive. Ascent

pressure

or descent

relief valve(s)

may be

are cracked,

uncontrolled,

damaged or

too fast.

contaminated.

The inflator

Improper use,

Buoyancy

valve

transport or

cannot be

(connected

storage.

guaranteed

with the

Wear and tear

during the

medium

of components.

dive. Ascent

pressure

or descent

hose under

may be

pressure),

uncontrolled,

the manual

too fast.

drain valve

and pressure

relief valve are

not working

properly and

are leaking.

CONSE-

SOLUTION

QUENCES

Do not start

the dive. Have

the BCD checked

by an authorized

DYNAMICNORD

technician.