Dynamite DYN4064 Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Зарядное устройство Dynamite DYN4064. Dynamite DYN4064 20 страниц. Passport ultra ac/dc charger cycler
Печатать страницу
A. D>C means that the charger will discharge
first, then charge.
B. C>D means the charger will charge first,
then discharge.
C. D/1 flashing means the charger is in the
discharge process and will charge when the
discharge mode is complete.
D. C/1 flashing means the charger is in the
charging process and will discharge when
complete.
E. D/1 alternate flashing designates that the
charger is in the cool down time period after
discharging.
F. C/1 alternate flashing designates that the
charger is in the cool down time period after
charging.
Charge and discharge capacities in mAh will be
displayed after the cycle is complete.
10
www.DynamiteRC.com
li-ion, li-Po and li-Fe
Charge Mode
warning:
Li-Po batteries can cause serious injury and fire
if charged inappropriately. Always confirm the
battery voltage and series cell count is correct
and never charge higher than a 1C rate. (1C
= charger current equals the battery capacity.
Example: A 1000mAh battery's charge current
limit is 1 amp. Example B 3300mAh battery's
charge current is 3.3A)
Li-Poly Charge
4.0A 14.8V(4S)
Message during li-ion/Poly Charging
Is 14.8V(4S) ?
No=Stop/Yes=Ente
Confirm if the number of selected battery cell
is correct. To select the correct voltage, use the
following formula to calculate the voltage of
your pack: 3.7V/cell (e.g. 4S = 4*3.7=14.8V). Be
careful to confirm the correct voltage and cell
count. Failure to due so may result in damage
or fire.
Dynamite Ultra AC/DC Charger/Cycler