Dynamite DYN4064 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ładowarka Dynamite DYN4064. Dynamite DYN4064 20 stron. Passport ultra ac/dc charger cycler

A. D>C means that the charger will discharge

first, then charge.

B. C>D means the charger will charge first,

then discharge.

C. D/1 flashing means the charger is in the

discharge process and will charge when the

discharge mode is complete.

D. C/1 flashing means the charger is in the

charging process and will discharge when

complete.

E. D/1 alternate flashing designates that the

charger is in the cool down time period after

discharging.

F. C/1 alternate flashing designates that the

charger is in the cool down time period after

charging.

Charge and discharge capacities in mAh will be

displayed after the cycle is complete.

www.DynamiteRC.com

li-ion, li-Po and li-Fe

Charge Mode

warning:

Li-Po batteries can cause serious injury and fire

if charged inappropriately. Always confirm the

battery voltage and series cell count is correct

and never charge higher than a 1C rate. (1C

= charger current equals the battery capacity.

Example: A 1000mAh battery's charge current

limit is 1 amp. Example B 3300mAh battery's

charge current is 3.3A)

Li-Poly Charge

4.0A 14.8V(4S)

Message during li-ion/Poly Charging

Is 14.8V(4S) ?

No=Stop/Yes=Ente

Confirm if the number of selected battery cell

is correct. To select the correct voltage, use the

following formula to calculate the voltage of

your pack: 3.7V/cell (e.g. 4S = 4*3.7=14.8V). Be

careful to confirm the correct voltage and cell

count. Failure to due so may result in damage

or fire.

Dynamite Ultra AC/DC Charger/Cycler