Autonics CT Series Руководство

Просмотреть онлайн или скачать pdf Руководство для Таймер Autonics CT Series. Autonics CT Series 13 страниц. Programmable digital counters / timers
Также для Autonics CT Series: Руководство (4 страниц), Руководство по эксплуатации (11 страниц)

Печатать страницу

For your safe, please read the below content carefully before you use the timer/counter!

Safe Caution

For your safety, please read the below content carefully before you use the meter !

Please comply with the below important points:

Warning An accident may happen if the operation does not comply with the instruction.

Notice

An operation that does not comply with the instruction may lead to product damage.

The instruction of the symbol in the manual is as below:

An accident danger may happen in a special condition.

Warning

1. A safety protection equipment must be installed or please contact with us for the relative information if the product is used under

the circumstance such as nuclear control, medical treatment equipment ,automobile, train, airplane, aviation, entertainment or safety

equipment, etc. Otherwise, it may cause serious loss, fire or person injury.

2. Apanel must be installed, otherwise it may cause creepage (leakage).

3. Do not touch wire connectors when the power is on, otherwise you may get an electric shock.

4. Do not dismantle or modify the product, If you have to do so, please contact with us first. Otherwise it may cause electric shock

and fire.

5. Please check the connection number while you connect the power supply wire or input signal, otherwise it may cause fire.

Caution

1. This product cannot be used outdoors. Otherwise the working life of the product will become shorter, or an electric shock accident

may happen.

2. When you connect wire to the power input connector or signal input connectors, the moment of the No.20AWG (0.50 mm2) scrwew

tweaked to the connector is 0.74n.m-0.9n.m. Otherwise the connectors may be damaged or get fire.

3. Please comply with the rated specifications. Otherwise it may cause fire after the working life of the product becomes shorter.

4. Do not use water or oil base cleaner to clean the product. Otherwise it may cause electric shock or fire, and damage the product.

5. This product should be avoid working under the circumstance that is flammable, explosive, moist, under sunshine, heat radiation and

vibration.

6. In this unit it must not have dust or deposit, otherwise it may cause fire or mechanical malfunction.

7. Do not use gasoline, chemical solvent to clean the cover of the product because such solvent can damage it. Please use some soft

cloth with water or alcohol to clean the plastic cover.

Model Illustration

2 P

24 Power Supply is also available as special order. Please indicate your requirement in your order

CT Series Multi

Features:

Design code

2P: 2 loop preset , 1P: 1 loop preset

S: 48H*48Wmm M:72H*72Wmm Y:36H*72Wmm

Display: 6: 6 digit display

CT Series Timer/Counter Multi-function

Page 01

function Counter/Timer

1.Maximum counting speed is 10Kcps.

2. Coefficent can be set as 0.001-99.999

3. Pulse input , PNP and NPN input can be set in the menu

4. With timing function , 9 kinds timing mode can be selected

5. Two loop alarms output for counting length/quantity , one

alarm for batch counting

6. Can be applied to the measure and control in light industry,

machinery , packing and food industry.

KKCTE02T-A/0-20131221