Galaxy Press GS-207M Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Galaxy Press GS-207M. Galaxy Press GS-207M 19 страниц.

NOTE: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or a similarly qualified person in order to avoid hazard.

2.Turn On the System

⚫

Switch on the system. (fig.2.1)

3.1 Press the Mode Select button located

in the center of the Control Panel

(fig.3.1).Press (+) and (-) button to

select different heater. (fig.3.2).

3.2 For heater 1/2 and 3/4, press "set"

button to choose "start temp" or

"finish temp", press (+) and (-)button

to set temperature. For heater 5 and

6,press "set" button to choose "start

temp", press (+) and (-)button to set

temperature.The temperature can be

set from 0° C (0° F) to 220° C (428°

F). (fig.3.2)

3.3 press set button again to finish

setting,move the cursor to "next",

ready to enter time setting page.

(fig.3.3)

2.1

3.1

3.2

3.3