Galaxy Press GS-207M Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Galaxy Press GS-207M. Galaxy Press GS-207M 19 страниц.

Remark:

1. heater 1/2 represent no.1 and no.2 heater, can only be set temperature at once time

together, because left air cylinder close the heater 1/2 together. Heater 1/2 can set "start

temp" and "finish temp".

2. heater 3/4 represent no.3 and no.4 heater, can only be set temperature at once time

together, because right air cylinder close the heater 3/4 together. Heater 3/4 can set "start

temp" and "finish temp".

3. Heater 5 does not work for GS-207M.

4. Heater 6 does not work for GS-207M

4.Adjusting Time

4.1 In the time setting page, Press (+)

and (-) button to select different

heater..(fig.4.1)

4.2 Press "set" button to activate time

value setting. Press (-) button to

lower the value ,or press the (+)

button to raise the time value .The

time setting range can be set from

0~999. Move the cursor to

"back",press "set' button to get back

to the main interface. (fig.4.2)

4.1

4.2