gales GS-509 Инструкция - Страница 2
Просмотреть онлайн или скачать pdf Инструкция для Пищевой комбайн gales GS-509. gales GS-509 4 страницы.
Печатать страницуIMPORTANT SAFEGUARDS
When using electrical appliances,basic safety precautions should always be
followed,including the following:
1. Read and save all instructions.
2. To protect against risk of electrical shock,do not immerse base,motor, cord, or plug in
water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. This appliance should not be used bychildren.
5. Unplug cord from outlet when not in use, before putting on or taking off parts, and before
cleaning.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions
or is dropped or damaged in any manner. Call our toll-free customer service number for
information on examination, repair or electrical or mechanical adjustment.
8. The use of attachments not recommended or sold by the appliance manufacturer, may
cause fire, electric shock, or injury.
9. Do not use your food processor if any part is broken.
10. Do not use appliance outdoors.
11. Do not let cord hang over edge of table or counter, or touch hot surfaces.
12. Keep hands and utensils away from moving blade and disc while processing food to
reduce the risk of severe personal injury and/or damage to the food processor. A rubber
scraper may be used but ONLY when the food processor is not running.
13. The blade and disc are sharp. Handle carefully. Store out of reach of children.
14. To reduce the risk of injury, never place cutting blade or disc on base without first putting
bowl properly in place.
15. Be certain lid is securely locked in place before operating appliance..
16. Never feed food into food chute by hand. Always use food pusher.
17. Do not attempt to defeat the lid interlock mechanism.
18. Make sure the blade or disc has come to a full stop before removing lid.
19. To reduce the risk of injury, be sure to insert or remove blade and disc using hubs provided
for this purpose.Use caution when removing blade and disc from the bowl, when emptying
the bowl, and when cleaning.
20. Be sure to turn switch to OFF ( O ) position after each use. Always use the pusher to clear
the food chute. When this method is not possible, turn the motor off and disassemble unit
to remove the remaining food.
21. The appliance is not intended for commercial, professional or industrial use. It is designed
and built exclusively for household use only.
22. Never use appliance for a longer period or with a larger amount of ingredients other
than that recommended by appliance manufacturer.
23. The maximum rating of this unit is based on using the Chopping/Mixing Blade. Using the
Slicing/Shredding Disc may draw significantly less power.
24. Do not place on or near a hot gas or electric burner or in a heated oven.
25. Do not use appliance for other than intended use.
26. This appliance is not intended for use by persons(including children)with resensory or
mental capabilities,or lack of experience and knowledge,unless given supervision or
2
HOW TO RELEASE SUCTION CUP FEET AFTER USE
The suction cup feet on the bottom of your Food Processor are designed to keep the unit stationary
during use. To maximize the life of your Food Processor please review the following directions:
Food Processor fully assembled: lift it from counter by placing hands
under unit as shown and lifting to one side.
OR
With Food Processor fully assembled: lift it from counter by grabbing
the handle as shown and lifting from same side as handle.
OR
With bowl and lid removed from
Food Processor
placing hands under unit as shown and lifting to one side
: lift it from counter by
7