gales GS-509 Инструкция - Страница 4

Просмотреть онлайн или скачать pdf Инструкция для Пищевой комбайн gales GS-509. gales GS-509 4 страницы.

Печатать страницу

was selected to reduce the hazards of becoming tangled in,or tripping over a longer

cord.If a longer cord is necessary,an approved extension cord may be used.The

electrical rating of the extension cord must be equal to or greater than the rating of

the appliance.Care must be taken to arrange the extension cord so that it will not

drape over the countertop or tabletop where it can be pulled on by children or

accidentally tripped over.

USING YOUR FOOD PROCESSOR

How to Lock the Bowl

Align base and bowl as illustrated.Turn bowl clockwise until it

locks into place. The bowl will lock onto the base in 3 different

positions for user convenience.

NOTE: The food processor will not work unless the bowl is

locked into position.

How to Assemble and Lock the Lid

Align lid as illustrated by placing thumbon lid tab and twisting

lid clockwise. Four visual alignment markers are provided (see

illustration), one on bowl, one onhandle and two on bowl lid.

NOTE: The food processor will not work unless the lid is locked

into position.

How to Operate the Controls

The control dial is conveniently located on the front of the base.

Rotate the knob clockwise to speed up. Rotate counterclockwise

to slow down. For instant on and off control, use the PULSE(P)

button by rotating knob counterclockwise. To turn off the machine,

rotate the switch to OFF(O).

Processing Tips and Techniques

*This food processor is excellent to chop, mix, slice, or shred most foods. However, to maintain peak

performance, do not use your food processor for the following: grinding grain, coffee beans or spices;

slicing frozen meat; or crushing ice.

*To achieve maximum capacity, use Chopping/Mixing blade of Big Mouth and add food no higher

than the maximum fill line on food chute. See Food Processing Charts for more information.

*Operating time will depend on quantity of food being processed. Most foods can be sliced, chopped,

or shredded in seconds. If unit is operated for 30 senconds continuously, let the processor rest about

3 minutes before continuing.

Processing Using Chopping/Mixing Blade

*For a more uniform consistency, start with pieces of food that are similar in size. Carrots, for

example,should all be cut in 1-inch (2.5 cm) chunks. Do not process 4-inch (10cm) pieces with 1⁄2-

inch (1 cm) pieces.

Processing Using Chopping/Mixing Blade

*The Chopping/Mixing Blade can be used to coarsely chop,finely mince,mix, or puree food to a

smooth consistency.

1. Make sure the Control Switch is turned to OFF (O) and the unit is unplugged.

2. Lock the bowl onto base.(See "How to Lock the Bowl" on page 3.)

3. Place the Chopping/Mixing Blade onto motor shaft of food processor in center of bowl.Turn

slowly until blade drops into place.Handle carefully; the blade is sharp.

4. Lock lid onto bowl.Insert food pusher into food chute.

*Do not puree or mash starchy vegetables like potatoes. They will be over-processed in a second

and turn gummy.

5. Plug in unit and process food .The processing speed

and time will determine the finished consistency of the

food.The Pulse button can help you avoid overprocessing.

Reference the food processing chart for recommended

processing times and speeds.

6. When finished processing,select OFF (O) or release from

PULSE position.Wait until blade has stopped rotating

before removing lid. Unplug the unit.

Processing Using Slicer/Shredder

*To slice or shred cheese, select firmcheese like Cheddar,Monterey Jack,or Swiss.Place cheese

in freezer for 30 minutes before processing.

*The Reversible Slicer/Shredder Disc has a slicing blade on one side and shredding teeth on the

other.The name engraved on the blade,facing up, is the function selected.Place on motor shaft

with desired cutting edge facing up.

1.Make sure the Control Switch is turned to OFF(O)and the

unit is unplugged.

2.Lock the bowl onto base.(See "How to Lock the Bowl" on

page 3.)

3.Place Removable Drive Sleeve on Motor Shaft.Put Slicer/

Shredder Disc on Removable Drive Sleeve with the desired

side facing up for either slicing or shredding.Lock lid onto

bowl.(See "How to Assemble and Lock the Lid" on page 4.)

4.To slice/shred large foods(such as chunk of cabbage,

green pepper, whole tomato) open food chute lid by lifting

latch. Depress food holder to the right.Insert food and lock lid.

*To julienne vegetables, slice then remove from bowl and restack the vegetables. Pack into food

chute with slices vertical. Slice again to make match-stick cut vegetables.

To slice/shred long,thin foods (such as potato, pepperoni, carrots, celery). Lock lid. Long foods

can be inserted into the chute opening and processed as long as the food chute lid is closed.

5.Insert food pusher in chute. Always use the food pusher

to feed food into the chute.NEVER PUSH FOOD

THROUGH CHUTE WITH HANDS.

6.Plug in unit.

7.Select speed. While pressing on food pusher, rotate the switch

for optimum slicing and shredding performance or PULSE

to process food. Reference the food processing chart for

recommended processing times and speeds.

NOTE:The food chute lid is designed to pivot towards the right when processing food that fills the

whole food chute capacity.

8.When food chute is empty, select OFF(O) or release from PULSE position.Wait until blade has

stopped rotating before removing lid.Unplug the unit.

Chopping/

Mixing Blade

Motor Shaft

Slicer

Shredder

Disc

Removable

Drive Sleeve

Motor Shaft