HighGear Loft Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Смотреть HighGear Loft. HighGear Loft 19 страниц. Altiware series
Печатать страницуALTIMETER FUNCTIONS
CALIBRATE THE ALTIMETER
1. Advance to the Altimeter (ALTI) display, using QUICK PRESSES of the S4 key
2. PRESS & HOLD the S5 key to enter the setting sequence
3. The current altitude will appear in the center line of the display with the
abbreviation CAL (Calibrate) in the upper line
4. Adjust the current altitude up and down using a QUICK PRESS of the S1 and S2
keys
5. QUICK PRESS the S4 key to set the altitude and advance to the most recent
Maximum (MAX) Altitude display. QUICK PRESS the S1 or S2 to clear the
Maximum Altitude back to zero.
6. QUICK PRESS the S4 key to advance to the Accumulated (ACC) Altitude display.
QUICK PRESS the S1 or S2 to clear the Accumulated Altitude display back to
zero.
7. Exit the Altimeter Calibration sequence using a QUICK PRESS of the S5 key
If you wish to retain the Maximum or Accumulate Altitude settings, simply QUICK
PRESS the S5 key after adjusting the current altitude setting.
ALTITUDE LOCK
If no significant changes in altitude for a period of 30-minutes the Loft unit will automat-
ically activate the ALTITUDE LOCK function. ALTITUDE LOCK is INDICATED BY THE
WEATHER ICONS APPEARING ON THE ALTIMETER DISPLAY. When the unit enters
the Altitude Lock mode, the altitude at that time is locked in memory and will not change
in response to gradual external barometric pressure changes. You can unlock the Altitude
Lock function at any time simply by pressing any key. The Loft unit will automatically
deactivate the Altitude Lock function if it detects any major change in pressure/altitude
over a short period of time.
17
ALTIWARE SERIES
ALTIMETER FUNCTIONS
ALTIMETER DISPLAYS
ALTIMETER GRAPH
The top line of the altimeter display shows a graph showing altitude changes over the past
24 hours. The Altimeter Graph is updated automatically every 15-minutes regardless of
which mode the watch is in.
CHANGE ALTITUDE UNITS
The Loft unit is capable of displaying altitude in either feet or meters. The user may change
the units of the display between Feet or Meters using the S2 key while in the Altimeter
Display. Pressing the S2 key for less than two seconds will briefly display the alternative
altitude unit. Continuing to hold the S2 key until the Feet or Meters icon located at the
lower right of the altitude display stops flashing will lock the display variable on screen
VIEW MAXIMUM AND ACCUMULATED ALTITUDE
Each time you enter the Altitude display, the top line of the display will scroll showing you
the Maximum Altitude you have achieved and the amount of Accumulated altitude you
have in memory, prior to changing over to the Altimeter Graph display
A QUICK PRESS of the S1 key at any time will show your current maximum and
accumulated altitude scrolling in the top line of the display
DO NOT PRESS & HOLD the S1 key unless you wish to store the information on
the display as a Data Point (See Page 21 Altimeter Data Point Memory)
LOFT
18