HighGear Loft Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Ver HighGear Loft. HighGear Loft 19 páginas. Altiware series

Imprimir página

ALTIMETER FUNCTIONS

CALIBRATE THE ALTIMETER

1. Advance to the Altimeter (ALTI) display, using QUICK PRESSES of the S4 key

2. PRESS & HOLD the S5 key to enter the setting sequence

3. The current altitude will appear in the center line of the display with the

abbreviation CAL (Calibrate) in the upper line

4. Adjust the current altitude up and down using a QUICK PRESS of the S1 and S2

keys

5. QUICK PRESS the S4 key to set the altitude and advance to the most recent

Maximum (MAX) Altitude display. QUICK PRESS the S1 or S2 to clear the

Maximum Altitude back to zero.

6. QUICK PRESS the S4 key to advance to the Accumulated (ACC) Altitude display.

QUICK PRESS the S1 or S2 to clear the Accumulated Altitude display back to

zero.

7. Exit the Altimeter Calibration sequence using a QUICK PRESS of the S5 key

If you wish to retain the Maximum or Accumulate Altitude settings, simply QUICK

PRESS the S5 key after adjusting the current altitude setting.

ALTITUDE LOCK

If no significant changes in altitude for a period of 30-minutes the Loft unit will automat-

ically activate the ALTITUDE LOCK function. ALTITUDE LOCK is INDICATED BY THE

WEATHER ICONS APPEARING ON THE ALTIMETER DISPLAY. When the unit enters

the Altitude Lock mode, the altitude at that time is locked in memory and will not change

in response to gradual external barometric pressure changes. You can unlock the Altitude

Lock function at any time simply by pressing any key. The Loft unit will automatically

deactivate the Altitude Lock function if it detects any major change in pressure/altitude

over a short period of time.

ALTIWARE SERIES

ALTIMETER FUNCTIONS

ALTIMETER DISPLAYS

ALTIMETER GRAPH

The top line of the altimeter display shows a graph showing altitude changes over the past

24 hours. The Altimeter Graph is updated automatically every 15-minutes regardless of

which mode the watch is in.

CHANGE ALTITUDE UNITS

The Loft unit is capable of displaying altitude in either feet or meters. The user may change

the units of the display between Feet or Meters using the S2 key while in the Altimeter

Display. Pressing the S2 key for less than two seconds will briefly display the alternative

altitude unit. Continuing to hold the S2 key until the Feet or Meters icon located at the

lower right of the altitude display stops flashing will lock the display variable on screen

VIEW MAXIMUM AND ACCUMULATED ALTITUDE

Each time you enter the Altitude display, the top line of the display will scroll showing you

the Maximum Altitude you have achieved and the amount of Accumulated altitude you

have in memory, prior to changing over to the Altimeter Graph display

A QUICK PRESS of the S1 key at any time will show your current maximum and

accumulated altitude scrolling in the top line of the display

DO NOT PRESS & HOLD the S1 key unless you wish to store the information on

the display as a Data Point (See Page 21 Altimeter Data Point Memory)

LOFT