Gallagher T10 Примечание по установке - Страница 5
Просмотреть онлайн или скачать pdf Примечание по установке для Устройство для чтения карт Gallagher T10. Gallagher T10 11 страниц. Reader
Также для Gallagher T10: Указания по установке (12 страниц), Указания по установке (12 страниц)
Печатать страницу
6.
Insert the M3 Torx Post Security screw (using a T10 Torx Post Security
screwdriver) through the hole at the bottom of the base to secure the
facia assembly.
Note: The recommended torque for the security screw is 0.7Nm
(0.5 lb/ft). It is important not to exceed the maximum torque of
1.5Nm (1.1 lb/ft).
7.
Removal of the facia assembly is a simple reversal of these steps.
Connections
A Gallagher T10 Mifare reader can connect to one of the following devices
using the "Cardax IV Reader" communications protocol:
•
Cardax FT Reader Module (for the Controller 6000)
•
Cardax FT GBUS Universal Reader Interface (Cardax FT GBUS URI)
•
Cardax FT Controller 3000-4R or 3000-8R
•
Cardax FT Universal Reader Interface (Cardax FT URI)
•
Cardax FT Reader I/O Interface
Facia
Fit screw to secure facia to base
Installation Note | Gallagher T10 Mifare Reader
Reader
Building
tail
cable
Connection
Part Number: 3E2453 R1 | 5