Dynaudio Contour Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Динамики Dynaudio Contour. Dynaudio Contour 17 страниц.
Также для Dynaudio Contour: Руководство пользователя (20 страниц), Руководство пользователя (20 страниц), Руководство пользователя (17 страниц)

Печатать страницу

Dynaudio Contour

Fig. 4 - Distance to walls.

Distance to back and side

►

To reduce possible influences from

walls

the back and sidewalls, the distance

to these boundaries should ideally not

Every loudspeaker not only disperses

be less than 0.5 meters (see Fig. 4).

sound energy directly into the room, but

Adapting the bass reflex port

also to the side and even backwards. As

a result, time-delayed reflections occur

and add to the original music signal.

To minimize low frequency reflections,

Thus, positioning loudspeakers too close

which will be heard as a thickening of

to walls can reduce sound quality.

the sound, the loudspeaker models

can be adapted to the room's acoustic

Dynaudio loudspeakers were developed

character by using foam plugs in the

to be placed free-standing, and therefore

bass reflex port. This will essentially

they reach their optimum performance

attenuate the room-induced boost in the

when positioned as clear of any walls as

low frequency range by dampening the

possible.

deep frequencies, yielding a more clear

and tight sound when the loudspeaker is

positioned near rear walls.

A, B ≥ 0.5 m

A ≠ B

►

Fully insert the foam port plugs

packed with your loudspeaker into

the bass reflex port, to attenuate the

bass output (if required).

►

If the attenuation of the bass volume

is too high (bass level too low) remove

the inner part of the foam plug. Then

fully insert the foam ring in the bass

reflex port. Make sure the ring is

formed in a concentric circular shape

within the port to prevent reduced

and turbulent airflow.

Spikes with sharp peaks

The sharp peaks of the spikes may cause injuries and damage sensitive surfaces like

hardwood flooring or tile.

►

Be careful when handling the loudspeakers.

►

Place plates between the spikes and the surface to protect the underlying surface.

Floor-standing loudspeaker

Compact loudspeaker set-up

set-up

The compact model is designed to offer

The floor-standing models feature

exceptional performance while taking

a special base construction, which

up minimal space. The speakers will

offers both an ideal performance and

realize their optimum performance when

mechanical basis. Integrated into the

used in conjunction with a dedicated

base plinth are four individual spike

stand (such as the Dynaudio Stands) to

assemblies. These stabilize the cabinet

position them at the proper height while

on an extremely small contact area, and

absorbing any resonance.

therefore prevent any wobbling while

offering optimal resonance control.

Due to its dimensions, you can also

The individually adjustable spikes allow

place the loudspeaker on a ledge or

levelling of the cabinet on uneven floors.

shelf or on top of furniture. But to

avoid the possibility of any negative

influence on sound quality, one should

take care to utilize a stable surface

offering a wide enough space in front

Positioning

of the loudspeakers as not to limit the

sound quality and performance. In such

applications or if placing the speakers in

enclosed audio/video furniture, the bass

reflex port can usually be left unplugged

as long as there is minimal clearance to

the boundaries at the top and rear of the

loudspeaker cabinet.