HighPoint SSD7000 Series Руководство по установке - Страница 12
Просмотреть онлайн или скачать pdf Руководство по установке для Компьютерное оборудование HighPoint SSD7000 Series. HighPoint SSD7000 Series 14 страниц. Linux rocky linux
Также для HighPoint SSD7000 Series: Руководство по установке (16 страниц), Руководство по установке (12 страниц)
Печатать страницу
Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide
3 Monitoring the Driver
Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
installed, it will be 0. In the following sections, we will use x to represent this number.
Using the following command to show driver status:
# cat /proc/scsi/hptnvme /x
This command will show the driver version number, physical device list and logical device
list.
4 Installing RAID Management Software
HighPoint RAID Management Software is used to configure and keep track of your hard
disks and RAID arrays attached to SSD7000 controller. Installation of the management
software is optional but recommended.
Please refer to HighPoint RAID Management Software documents for more information.
5 Trouble Shooting
If you do not install the system or update the kernel according to the installation manual, the
system will crash and you will not be able to enter. Please follow the steps below.
a. Select the default (kernel: 5.14.0-162.6.1.el9.x86_64) and enter the system.
b. Install Linux Opensource driver.
c. Linux Opensource driver link, open the following link to enter the "Software
Download" page to download:
https://www.highpoint-tech.com/nvme-3/ssd7540
https://www.highpoint-tech.com/nvme-2/ssd7505
https://www.highpoint-tech.com/nvme-2/ssd7502
- 10 -