highwood Bespoke Deep Seating Руководство по сборке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по сборке для Внутренняя отделка highwood Bespoke Deep Seating. highwood Bespoke Deep Seating 8 страниц.
Печатать страницу
Adding Arms to a Seat
METAL
BRACKET
LEG
3) Attach arm/leg to back using (1) D
bolt.
4) Align arm/leg with front of seat
base as shown. Secure using (2) C
screws.
Drilling 1/8" pilot holes first will assist
in driving the screws.
5) Repeat on other side.
B
ARM
1) Attach leg to arm by inserting leg
between fins on metal arm bracket
and secure using (2) B screws.
Drilling 1/8" pilot holes first will assist
in driving the screws. To do so, hold
the leg in place and mark each screw
location on the leg. Remove the leg
and drill a 1/2" deep hole at each
location.
2) Repeat for other arm/leg
assembly.
BACK
D
For information on Care and Cleaning or to Register your
highwood product, please visit www.highwood-usa.com.
ARM
ARM
ARM
B
LEG
When positioning the leg, align
the pilot hole in the leg with the
hole in the bracket.
SEAT BASE
BACK
C
LEG
AD-DS-KIT
08.25.2021
Page 5 of 8