highwood Bespoke Deep Seating 조립 설명서 - 페이지 5
{카테고리_이름} highwood Bespoke Deep Seating에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. highwood Bespoke Deep Seating 8 페이지.
페이지 인쇄
Adding Arms to a Seat
METAL
BRACKET
LEG
3) Attach arm/leg to back using (1) D
bolt.
4) Align arm/leg with front of seat
base as shown. Secure using (2) C
screws.
Drilling 1/8" pilot holes first will assist
in driving the screws.
5) Repeat on other side.
B
ARM
1) Attach leg to arm by inserting leg
between fins on metal arm bracket
and secure using (2) B screws.
Drilling 1/8" pilot holes first will assist
in driving the screws. To do so, hold
the leg in place and mark each screw
location on the leg. Remove the leg
and drill a 1/2" deep hole at each
location.
2) Repeat for other arm/leg
assembly.
BACK
D
For information on Care and Cleaning or to Register your
highwood product, please visit www.highwood-usa.com.
ARM
ARM
ARM
B
LEG
When positioning the leg, align
the pilot hole in the leg with the
hole in the bracket.
SEAT BASE
BACK
C
LEG
AD-DS-KIT
08.25.2021
Page 5 of 8