highwood Bespoke Deep Seating 조립 설명서 - 페이지 4

{카테고리_이름} highwood Bespoke Deep Seating에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. highwood Bespoke Deep Seating 8 페이지.

Adding a Back to a Seat Base

If the set you are constructing consists of a corner configuration such as a sectional,

place (1) seat base and (2) backs aside. These will be used on page 8 of this guide.

1) Attach the left (M2) and right

(M3) metal brackets to the back legs

of the seat base as shown using (2)

B screws in each bracket.

Drilling 1/8" pilot holes first will

assist in driving the screws. To do

so, hold each bracket in place and

mark each screw location on the

seat base. Remove the bracket and

drill a 1" deep hole at each location.

IMPORTANT: Note location of

brackets and direction of seat slats

in the image to the right. This will

ensure a consistent appearance

across multiple seats.

2) Attach the back to the

brackets on the seat base

using (3) B screws on each

side.

Drilling 1/8" pilot holes first

will assist in driving the

screws.

BACK

For information on Care and Cleaning or to Register your

highwood product, please visit www.highwood-usa.com.

SEAT BASE

AD-DS-KIT

08.25.2021

Page 4 of 8