AGS Merlin 1000Si Руководство по эксплуатации и установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Контроллер AGS Merlin 1000Si. AGS Merlin 1000Si 9 страниц. Gas safety products, gas utility controller
Также для AGS Merlin 1000Si: Руководство по эксплуатации и установке (7 страниц), Руководство по установке и эксплуатации (16 страниц), Руководство пользователя (12 страниц)

Merlin 1000Si

Gas Utility Controller

If there are no remote emergency stop buttons installed, wire this directly to the terminal

marked [EM REMOTE].

3.6

FAN SWITCH INTERGRATION

There is the facility to connect a Fan Switch (FS1 or FS2 sold separately).

The Fan Switch provides the facility to turn the fan(s) ON when the Merlin panel is on and turn

the fans OFF when the panel is switched off

There is a dip-switch located inside the facia of the Merlin 1000Si labelled [EM SELECTION].

This is factory set in the 'OFF' position which instructs the system to shut down the fan(s) and gas

supply on activation of the Emergency shut off button(s).

On installation, this can be switched to the 'ON' position, this will instruct the system to leave

the fans on and only shut off the gas supply on activation of an Emergency shut off button.

Note: This option is not available if a Fan Switch is not installed.

3.7

The Merlin 1000Si has a built-in auto reset feature. There is a dip-switch located on the inside

facia of the Merlin 1000Si labelled [Auto Reset].

This is factory set in the 'OFF' position, this means, if you experience a power cut, the panel has

to be restarted manually.

This can be switched to the 'ON' position and will instruct the system to restart automatically

when power is restored following a power cut or similar situation.

Rev: 04 Date: 22-10-18

User & Installation Manual