hikam Q7 Краткое руководство - Страница 8
Просмотреть онлайн или скачать pdf Краткое руководство для IP-камера hikam Q7. hikam Q7 8 страниц. Smart home wireless ip-camera
Также для hikam Q7: Руководство (6 страниц)
Печатать страницу
Video record doesn't work!
My Camera -> Setting -> Record Settings, to choose how to record and switch it on
Make sure the SD Card is inserted correctly and the corresponding LED is on.
Make sure the SD Card is not kaput. If necessary, check the SD Card on your PC
Forget the device password!
There is a reset hole at the bottom of the camera, use a toothpick or similar objects
inserted into the reset hole, restore the initial password: 123.
Forget the App password!
Register a new account with another E-Mail address.
WiFi Configuration / QR Code don't work!
Check the Wi-Fi Antenna is mounted correctly.
Select the correct WiFi from the network list and re-enter the WiFi password
The camera needs several seconds to read the QR Code, hold your smart phone
steadily. Keep the distance from the camera to your smart phone between 20cm to
30cm.
If the camera is already configured with one network, it will not accept another
configuration. If you DO want to change the configuration, reset the device with the
reset hole. See "Forget the device password" above.
Connect the camera to the router with Ethernet cable and check whether the camera is
working. You can also configure the WiFi settings in this way.
Configure the WiFi at the place where you are sure the WiFi signal is strong and move
the camera to the place you want to install it.
No connection after power cycling of router!
Depending on your router and ISP (Internet Service Provider), the camera needs
several seconds or minutes to re-connect to the internet. Wait a while and try again.
No connection although Ethernet or WiFi!
Check the router is connected to the internet.
Q
A
&