AFL OptiNID 500 Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Шкаф AFL OptiNID 500. AFL OptiNID 500 8 страниц. Optical demarcation closure

CABLE INSTALLATION

6. Place one wrap of a foam spacer around

the buffer tube.

Secure the buffer tube to the splice tray using

a tie wrap. (Figure 3)

PIGTAIL

INSTALLATION

Caution: In order to avoid micro bends or fiber

damage do not over-tighten the tie wraps around

the fiber bundles.

1. Use accepted local practice to clean the connector

end face.

2. Plug the pigtail assembly into the adapter plate as

specified by the local engineering practice.

3. Repeat steps 1-2 for each additional pigtail assembly

to be installed.

4. Route the pigtail assemblies to the splice tray.

Note: For best practice it is recommended that the

pigtail assemblies be routed through protective

transport tubing for mounting into the splice tray.

5. Place one wrap of a foam spacer around the tubing

6. Secure the tubing to the splice tray using a tie wrap.

(Figure 4)

COMPRESSION

FITTING INSTALLATION

Caution: In order to avoid micro bends or fiber

damage do not over-tighten the tie wraps around

the fiber bundles.

INSTALLATION INSTRUCTIONS

(CONTINUED)

OptiNID

500 Optical Demarcation Closure

Figure 3

Figure 4

Specifications are subject to change without notice.