aireRyder F0028 Руководство - Страница 7

Просмотреть онлайн или скачать pdf Руководство для Вентилятор aireRyder F0028. aireRyder F0028 10 страниц. Original ceiling fan

Печатать страницу

Blade

Blade Bracket

Fig.14

Thread the blade screws through the

blade and the blade bracket. Tighten

all blade screws securely. Repeat to

other blade.

Fan Light Installation:

WARNING:

As per EPACT 2005 requirements, this fan light has a built-in current limiting device to conserve

energy. The fan light will not operate if the combined wattage of the installed bulbs exceeds 190

Watts. If the fan light shuts off shortly after being switched on, it may be due to excessive current

demand. You should replace the light bulbs with lower wattage bulbs.

Bulb Type G Max.60W

(included)

Install bulbs (included). See relamping

label at socket area or packaging for

maximum wattage.

Reverse

Slide Switch

Forward

Fig.18-a

The slide switch sets the direction of fan rotation. Select the desired

direction of fan rotation. Push the slide switch bottom for " Forward"

and top for "Reverse".

Blade Screw

Insert the blade bracket through the

slot on the fan fixture set. Align holes

and fasten blade bracket to the fan

fixture set with screws. Repeat for

remaining blade brackets.

Suggest: Using magnetic Philips

screwdriver.

Fan Fixture

Glass Shade

Fig.16

Fig.15

Blade Bracket

Screw

Fig.17

Reverse

Slide Switch

Forward

Fig.18-b

PAGE: 7 / 9

Outside rim of glass shade has

three raised strips separated by

three flat areas. To lock glass

shade to fan fixture, align the

three bumps on inner rim of fan

fixture with three flat areas on

outside rim of glass shade and

carefully raise glass shade into

fan fixture. Hold and twist glass

shade clockwise until the glass

shade is firmly locked in place.

Fig.19

Turn ON the electric circuit at the

main fuse or circuit breaker box.

140819